Intermatic timer manual

[Nummelin]

.
.
Download / Read Online Intermatic timer manual >>
http://www.zcr.file1.site/download?file=intermatic+timer+manual
.
.
.
How do you program Intermatic timer to dusk and dawn? Press ON/OFF to set your exact local time for DAWN (Fig 11), then press + to set the correct HOUR. Press ON/OFF to display MIN (Fig. 12), then press + until the correct minute is shown. Repeat Steps a and b to set exact local time for DUSK.
fileslib. Refer to the Installation and User Instructions Sheet for more information. To Clear the Timer. 1. Press and hold down the ON/OFF button. 2. Using a
NOTE: The distance between switch timer and remote switch must not exceed 100 feet. Locate the COMMON wire connected to first old switch. It might be attached.
Before you program the timer, be sure to perform these instructions. Intermatic Incorporated will repair or replace it, at its sole option,
How to Program the ST01 Astronomic Setting Thomas & Betts’ Blackburn® Hex Flex® Die Duration: 5:59 Posted:

[Yazar]

Yazılar